SiteWash Flexi

SiteWash Flexi: compact 7 ft wheel wash for tight entrances

A compact 6 ft 7 in (2 m) wheel wash with the wash deck mounted directly on the tank. One excavation, a smaller footprint, and a fit for tight site entrances.

SiteWash Flexi: wash deck, side screens and control panel mounted on the tank
Wash passage
6 ft 7 in (2 m)
Excavation
One
Layout
Wash deck on the tank
Axle rating
33,000 lb (15 t)

Overview

About the SiteWash Flexi

Standard SiteWash systems place the wash bay beside the recycling tank, which needs two excavations at two depths. On the SiteWash Flexi, the driving bars and side walls sit on a support frame mounted directly on the tank, so the whole system goes into one excavation and takes up less room at the entrance.

The SiteWash Flexi was supplied to the zinc concentrate loadout at Eldorado Gold's Olympias mine in Greece, delivered through Ausenco in 2025, where concentrate washed off the trucks is recovered and returned to the process.

Where it's used. The concentrate loadout at the Olympias mine, Greece.

Specifications

Specifications

Wash passage6 ft 7 in (2,000 mm)
LayoutDriving bars and side walls on a support frame, mounted on the tank
ExcavationOne
Water capacity1,585 gal (6,000 L)
Electrical supply480 V three phase 60 Hz (North America), or 400 V three phase 50 Hz (Europe)
Axle rating33,000 lb (15 t)

All spray systems: 9 ft 10 in (3,000 mm) wheel passage, 11 ft 2 in (3,400 mm) chassis clearance, 4 ft 8 in (1,420 mm) side screens, rated for 33,000 lb (15 t) per axle and vehicles up to 45 t gross. Open top, with no height restriction.

Throughput depends on ground conditions and water volume, and every system is sized from a site assessment. Full specifications, general arrangement drawings and lift weights are supplied with every quotation.

At a glance

How the SiteWash Flexi is built

Platform
Bolted steel superstructure in 2-meter modules
Tank
SiteWash steel tank, existing concrete tank or lagoon
Groundworks
Excavation and compacted stone base
Delivery
One trailer, one lift, with the steel tank
Hot work
None on site
Wash bay
No moving parts

Standards

Engineering standards

Structural steel
S235 and S355
Finish
Hot-dip galvanized to EN ISO 1461
Construction
Bolted, with no welding on site
Rating
33,000 lb (15 t) per axle, 45 t gross
Controls
Siemens controller in a 304 stainless steel IP66 panel, Eaton HMI option
Electrical
CE marked for the EU. 480 V 60 Hz with UL 508A panel for North America

Installation

Installation

Inset. The tank and wash bay go into a stepped excavation on a compacted stone base and finish flush with the road, so trucks drive straight through with nothing to strike.

Surface mounted. Sits on the ground with ramps, for sites where excavation isn't possible or permitted.

With no welding or hot work. Installed by Glanaco, a local partner or the contractor's own team, working to the Glanaco installation manual with our support. Operator training is included.

Installation documents on request

Inset SiteWash wheel washSurface mounted SiteWash wheel wash with steel ramps

Questions

Frequently asked questions

What power does the SiteWash Flexi need?

A three phase supply: 480 V 60 Hz in North America or 400 V 50 Hz in Europe. The pump rating is confirmed with the quotation.

Does the SiteWash Flexi need a water connection?

Yes, for the first fill and for top-up. Wash water is recirculated in a closed loop, so top-up covers only evaporation and water carried off on vehicles.

How many trucks a day can the SiteWash Flexi handle?

Sized to the site, depending on ground conditions and water volume. Every system is sized from a site assessment.

How often is the tank emptied?

Typically every two to three months, and sooner on heavy ground. The site arranges emptying with a vacuum truck, and Glanaco maintains and services the system.

Can I rent the SiteWash Flexi?

Yes. Rental is available direct in Ireland and the UK, and through partners in other markets. Rental includes delivery, installation, commissioning and collection.

What is the warranty?

5 years on the superstructure and tank. 2 years on pumps and control panels. The warranty applies to new systems.

Tell us about your site

Describe the entrance, the traffic and the timeline, and we will recommend the right system.

CallContact us